Get Quote

Get Your Project Feasibility Study Absolutely Free!

Fill Out The Form Below So Our Experts Can Perform The Initial Due Diligence For Your Project...

1

Fill Out The Form

Take a couple of minutes to tell us about your future development. Our expert quotes team will look over the details and get started on the due diligence process.

2

Ampflo Will Review

We'll conduct a feasibility study and find the most cost effective option to ensure your development is compliant.

3

Get An Estimate

Once our experts have reviewed your proposed development we’ll send you an outline of estimated costs for certification and construction.

Let's Have A Discussion

Your data is secure and will not be shared or sold to third-parties. We use your information for internal purposes only in order to follow-up with you about your request. 

Frequently Asked Questions

Do I Need An Energex Certificate Of Supply?

Yes, this is part of your Council Development Conditions. You will need this document for plan sealing purposes and/or an electrical connection.

What Do I Need To Give Ampflo For An Energex Certificate Of Supply Or NBN Provisioning Letter?

You will need to provide us your Council Development conditions and the approved plans.

How Long Does It Take To Get An Energex Certificate Of Supply?

One of the following will apply:

  1. 1
    If the power is available from the existing infrastructure without any works required allow 10-12 working days.
  2. 2
    If electrical works are required and no Energex bond is paid, then the Certificate is available about 4 weeks after the construction has been completed. This is usually 3 months from start of project.
  3. 3
    If electrical works are required and no Energex bond is paid, then the Certificate is available about 4 weeks after the construction has been completed. This is usually 3 months from start of project.

Do I Have To Connect Power To My Vacant Lot?

Power cannot be connected to a vacant lot. When power is needed by new owner/ builder an application needs to be made to Energex.

What Is A Property Pole?

A wooden or steel pole that supports an overhead service cable. A property pole is installed inside private property and must be maintained by the land owner.

Do I Need To Install A Property Pole Prior To Plan Sealing?

This will depend on your council conditions.

Does Ampflo Install Property Poles?

No. However, we can provide you with the names of companies that install property poles.

What Is A Service Conduit?

A service conduit is a plastic pipe used to protect electrical and NBN service cables. These service conduits are generally installed by your civil contractor or electrician. The service conduits are installed in private property.

What Is Underground Power?

Power supplied underground through conduit and cables to your property.

How Long Does It Take To Install Underground Power?

It depends on the size of the project. All approvals (Councils, NBN and Energex) are required before installation can begin. However, for small to medium developments the expected timeframe can be up to 12 weeks from design through to final construction.

Does Energex Build The Energex Network Where Required?

Generally, an accredited Energex contractor builds the Energex network. This depends on the type of development and occasionally Energex will build the network.

Can My Electrician Build The Energex Network?

NO. Only Energex accredited contractors or Energex can build the Energex network.

I’m In An Overhead Area, Do I Need To Have An Underground Supply?

This will depend on the Council Development Conditions and the Energex requirements.

How Do I Disconnect My Power? Where Do I Apply?

To have power disconnected due to a house being removed, moved, or demolished the Developer must contact Energex and request an abolishment of connection.

How Do I Disconnect My NBN Or Telstra? Where Do I Apply?

To have NBN or Telstra disconnected due to a house being removed, moved, or demolished the Developer must contact NBN or Telstra and request an abolishment of connection.

What Is Telecommunications Infrastructure?

Telecommunications Infrastructure is the NBN or Telstra network of conduits, cables and pits.

Do I Have To Install Telecommunications Infrastructure (e.g. NBN Or Telstra)?

Yes, your development will need to be provisioned for NBN or Telstra cabling. The service provider is determined by the carrier for your area. In most areas within South East Queensland this is now NBN.

My Development Is In A NBN Area. What Do I Need To Do?

Contact Ampflo to arrange NBN provisioning required for your development to meet your Council Development Conditions.

My Development Is Not In A NBN Area. What Do I Need?

Contact Ampflo to arrange provisioning with the local carrier for your development to meet your Council Development Conditions.